39
Operations & Maintenance Manual: Setting Up
PROCEdURE 5. SET THE dATE & TIME
1. Turn on the device by pressing the
Power
button
.
2. From the Home screen, press the
Settings
button
to open the Settings screen.
3. On the Settings screen, push either the
Up Arrow
button
or
Down Arrow
button
buttons until
“Date & Time” is highlighted. Press the
Enter
button
to open the Date and Time screen.
4. On the Date and Time screen, use the
Up Arrow
button
and
Down Arrow
button
to move to
the desired unit (hours, minutes, month, day, year). When the desired unit is highlighted, press the
Plus
button
to increase values and the
Minus
button
to decrease values.
Note: If the time display is set to show a 24‑hour clock, the hour units are 0–23. If the clock is set to
show a 12‑hour clock, the hour units are 1‑12.
5. When the time and date are set correctly, press the
Settings
button
to return to the Settings screen.
From the Settings screen, push the
Home
button
to return to the Home screen.
Summary of Contents for AORTASCAN AMI 9700
