1794-150413(1)EN
Installation manual awning V296 Santos
7
3. Electrical wall control
TIP! Luting the hole
In a situation of an electric wire to the inside, we advise to lute the hole where the wire enters. This in order to prevent
moisture from slipping to the inside. Attention! Do this both on the inside and outside.
3.2 Standard factory adjustment
The motor control is standard set.
View the included instruction for the motor and the possible remote control for more information.
blue
brow
n
blue
black
brow
n
brow
n
yellow/green
blue
brow
n
yellow/green
blue
black
brow
n
brow
n
yellow/green
yellow/green
blue
brow
n
blue
black
brow
n
brow
n
yellow/green
blue
brow
n
yellow/green
blue
black
brow
n
brow
n
yellow/green
yellow/green
fig. 3.1 Motor left (seen from the outside)
fig. 3.2 Motor right (seen from the outsid
3.1 Connecting the wall control
Follow the steps below:
1.
Check the position of the motor (left or right) seen from the outside.
2.
When you have the control inside, first feed a cable through the hole in the wall that you drilled earlier.
3. Connect the four-conductor cable of the motor and the three-conductor cable with plug according to the
scheme below.
4. Insert the plug in the power socket.
5.
The awning is now connected. Before you continue the installation, check if the awning correctly unrolls itself.
www.samsondoors.co.uk
0800 328 6250
www.samsondoors.co.uk
www.samsondoors.co.uk
0800 328 6250
www.samsondoors.co.uk
