12908357-180528EN(3)
Subject to misprints, errors and technical modifications.
Installation manual Sun awning V255 Salou
7
3.1 Connecting the remote control
1.
If the power point is located on the inside, first guide the wire through the hole in the wall you drilled before.
2. Install the plug according to the color scheme below:
•
Brown
220V power supply
•
Blue
220V power supply
• Yellow/green
grounding
•
Black
(do not connect)
• White
(do not connect)
• Orange
(do not connect)
3. Put the plug in the power point.
4.
The awning is now connected. Before you continue the installation, check if the awning rolls out correctly by using the
remote control.
TIP! Sealing the hole
In case of an electrical wire to the inside, we advise to seal the hole where the wire comes in. This to prevent moisture
from running inwards. Attention! Do this both on the in- and outside.
3. Remote control
