background image

A high quality cloth is integrated into your chosen 
screen. In view of optimal quality we have chosen a high  
technology production process in which every step of 
the production is strictly selected. By way of automation,  
permanent checks, laboratory tests and finely detailed 
after-care, nothing is left to chance. This allows us to  
guarantee the resistance as well as the strength and  
durability of the colours of your screen for many years to 
come.

Starting with a completely pigmented poly-acryl material, 
which gives it its exceptional quality, our screens have 
the advantage of total monitoring during the production  
process. In spite of all this there may be small irregularities 

in your screen that are difficult to detect and impossible 
to avoid. They are inherent in all technical materials but 
do not reduce the technical presentation and durability 
of your screen.

Waffling, chalk stripes, small pleats next to the seam or  
in the middle of the screen or nap can appear. The retailer 
cannot be held responsible for these irregularities.

Cable motor: if broken off, cannot be guaranteed.

User information

These small irregularities have no effect whatsoever on the quality of the screen and do not constitute the screen being  
replaced. However do inform us if you notice any irregularities in colour fastness, decay or resistance, in fact in any of the basic 
characteristics of our 2-year guarantee.

Wave forming

Next to the seams, caused by the 
unavoidable tension difference in 
rolling up.

Fold stripes/ chalk stripes

A fold caused during the  
manufacture, can show a darker  
stripe by light reflection. This is 
mostly noticeable in lighter  
coloured blinds.

Wave forming or wrinkle forming 

All technical materials can display 
these symptoms in the middle of  
a canvas. They are especially  
noticeable with backlight through 
the difference in light reflection.

www.samsondoors.co.uk

0800 328 6250

www.samsondoors.co.uk

www.samsondoors.co.uk

0800 328 6250

www.samsondoors.co.uk

Summary of Contents for V225 Porto













Reviews: