Veon SRO6163, Manual

Page: 5 / 6

Playing Audio with Bluetooth Wireless Technology
Pairing with a New Bluetooth Enabled Device
Press the
【
MODE
】
button until it shows BLUE on the display. The party speaker is now waiting for pairing.
Turn on your device, and scan the available Bluetooth Device.
Select SRO6163 from your device scan list to pair. Enter 0000 or 1234 if some device need PIN code.
If pairing is successful, the party speaker indicate light will stop ashing.
If you cannot pair your device successfully, please re-start the party speaker and re-scan the available Bluetooth device name in your
external device.
NOTE: If your external device does not support A2DP, you might not be able to pair with the Party Speaker.
Connecting to Bluetooth Device Stored in Memory
Turn on the Party Speaker and press the
【
MODE
】
button to select
【
BLUETOOTH
】
. The party speaker will
start searching for the previously paired devices. If an available device is found, the system will connect to the
Party Speaker automatically.
Playing Audio Via Bluetooth Wireless Technology
After successful connection, you can play music from your external device, like mobile phone, MP3 player,
Computer and so on.
Press the button to play or pause music ,Press the or to skip to the previous or next track.
Audio Input Operation
This unit is equipped with a 3.5mm AUX input socket. If your audio device has a 3.5mm audio output socket
(line-out or headphones), use the include 3.5mm audio cable that we provide in the spare parts to connect the
party speaker to your device.
Using the Audio Input Function
Press the
【
MODE
】
button until it shows AUX on the display. The party speaker is now waiting for connecting to
the external device.
Turn on your external device and playing music, the Party Speaker will play the sound in your external device.
NOTE: It will have a little signal noise when you are connecting with external device and party speaker. If you are not using the Audio
Input function, please disconnect the AUX cable.
Wireless Microphone
This Party Speaker comes with a wireless microphone for announcements or karaoke entertainment. Before
rst use, you will have to install two AA batteries(not included).
Battery Installation
Open the cover to the battery compartment at the back of microphone
.
Instructions
Insert 2 AA size batteries, making sure to match the polarity ma/-) on the batteries with those inside the
compartment.
Close the battery compartment.
Battery Precautions
CAUTION : Danger of explosion! Ensure to insert batteries according to the polarity markings inside the battery
compartment.
Replace all batteries at the same time with fresh batteries of the same size type.
Do not mix old and new batteries, different types of batteries of the same size and type.
Do not mix old and new battery leaks or ruptures.
Note that there are rechargeable and non-rechargeable batteries. Do not attempt to charge non-rechargeable
batteries.
Remove the batteries when the microphone is not in use for a long time to avoid leakage. Batteries can leak
chemicals that can damage electronic parts.
Dispose of batteries promptly and properly, observing any local hazardous waste regulations. Do not burn or
bury them.
Keep batteries away from children. If you suspect a battery may have been swallowed, seek immediate medical
assistance.
Microphone Operation
The microphone has one switch at the front, as illustrated in Fig.2.
Push the switch up to the top to Switch On the Microphone.
For the best reception, do not move the wireless microphone further than 5 Meters away from the Party Speaker.
Push the switch down to switch off the microphone.
Important Notes
While using the microphone, avoid being put the microphone opposite the bass of Party Speaker, as they may
have Whistler Noisy.
While using the microphone, avoid being close to metal surfaces or walls, as they may affect the wireless
transmission.
To get the best singing performance, keep the micro phone within 5-15cm of the mouth and at a 45 degree angle.
When using the microphone, always pay attention to the battery. If the battery is low, the indicator light will come
on and the performance will progressively become poor.
Caution: Please do not put the microphone opposite the bass of Party speaker, as they break the party speaker.
Instructions
BATT
ON
MUTE
OFF
switching amplier
Fig.2
battery cover
7 8