VENUS CONCEPT NeoGraft 2.0, User Manual, Page: 129 / 210

Operating Instructions
NeoGraft 2.0® User Manual 5-19
6. While looking through the implanter head, turn the adjusting
screw of the handpiece to move the implanter head's piston tip
to the correct position, as shown in
Figure 5-11.
7. Connect the distal end of the implantation tube to the suction
port of the implanter head.
5.8.2. Performing the Implantation
To perform the implantation (refer to section 5.5.2 ):
1. Verify that the Recipient Site Treatment screen appears. If not,
from the treatment screen, toggle the
Extract/Implant
Selector to Implant ; the Recipient Site Treatment screen
appears, as shown in Figure 5-12.
Figure 5-12. Recipient Site Treatment Screen (in Pause
State)