12
Venue Tetra Control Manual
Footswitch Operation
The Tetra Control comes with an included footswitch for hands-free operation.
Each button on the footswitch corresponds to a control on the Tetra Control, and any settings
implemented via the footswitch will be reflected on the front panel of the Tetra Control.
To connect the footswitch, plug the included TRS cable into the
¼”
input jack on the back of the unit.
Plug the other end of the TRS cable into the
¼”
FSW-IN jack on the back on the Tetra Control unit.
Unlike the Preset Knob on the Tetra Control, the Preset Up and Down buttons on the footswitch will
instantly change to the next program without confirming the selection.
For detailed functions, please see the table below.
Front
Back
FUNCTION
INSTRUCTIONS
Preset Up (Forward)
Scrolls forward/back one program in the Presets options
(0-30). Pressing this button will also scroll forward/back
one Mood while All On is active, and one Strobe pattern
while Strobe Mode is active. Using the foot controller
Preset buttons automatically confirms the selection
when pressed.
Preset Down (Back)
All On
Press this button to activate or deactivate All On Mode.
Strobe
Press this button to activate or deactivate Strobe Mode.
Blackout
Press this button to activate or deactivate Blackout.
Summary of Contents for tetra control
Page 2: ......