laser and controller instruction manual
DMX MODE
1. Use a standard DMX512 controller in DMX Mode.
2. Set the DIP switch in corresponding position, that is DMX Mode: #1 through #10.
3. Use XLR-XLR cable to connect DMX512 controller with the DMX input of first projector, and then connect output of the
first projector with input of second projector until all the projectors are connected in this way.
4. Two seconds after master is turned on, it emits a beam.
DMX Connection
1.DMX
2.DMX
N.DMX
DMX512
8129.01 Venue PP laser Instr.indd 6
5/2/08 6:09:26 PM
