12
by
TM
THINTRI 38 LED / THINTRI 64 LED
OWNER’S MANUAL
CONFIGURATION (STANDALONE)
Set the product in one of the standalone modes to control without a DMX controller. Connect the product to a
suitable power outlet.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch. Automatic Programs.
(To run the ThinTri38/64 in automatic mode, follow the instructions below):
AUTOMATIC PROGRAMS
To run the ThinTri38/64 in automatic mode, follow the instructions below:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use
<UP> and <DOWN> to select an auto program (P 1–P 4).
4. Press <ENTER>.
AUTO-PROGRAM SPEED
To change the auto-program speed on the ThinTri38/64, do the following:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Use <UP> and <DOWN> to increase or decrease the program speed (S 1–S100).
3. Press <ENTER>. The product will return to the last selected mode.
SOUND-ACTIVE MODE
To run the ThinTri38/64 in sound-active mode, do the following:
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER>.
3. Use <UP> and <DOWN> to select a sound-active program (Snd1 or Snd2).
4. Press <ENTER>.
The product will only respond to low frequencies of music (bass and drums).
SOUND SENSITIVITY
To change the sound sensitivity on the ThinTri38/64, follow the instructions below:
1. Press <MENU> repeatedly until SenS shows on the display.
2. Use <UP> and <DOWN> to increase or decrease the sound sensitivity (u 0–u100).
3. Press <ENTER>. The product will return to the last selected mode.
PRESET COLOR MODE
To run the ThinTri38/64 in preset color mode, follow the instructions below:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> and <DOWN> to select a static color (C 1–C 7).
4. Press <ENTER>.
