according to the polarity indicated. Replace the cover and tighten the screws.
ALTITUDE SETTING
After battery installation, the main unit will enter altitude setting mode directly. Press “
▲
” or “
▼
” to
select the unit in meter or feet. Press “BARO” to confirm. Then press “
▲
” or “
▼
” to enter your current
altitude. Press “BARO” to confirm and exit the setting. This allows the unit to provide a more accurate
weather forecast reading. (For more information, see “WEATHER FORECAST & BAROMETRIC
PRESSURE” section)
SETTING UP THE WIRELESS THERMOMETER:
For the first installation, always turn on the home unit and then the remote sensor. Set Channel 1
for the first remote sensor. Set channel 2 and channel 3 for the 2
nd
and 3
rd
sensor.
Press and hold CHANNEL button on main unit until a beep is sound to search for remote sensor.
Press the Tx button on the back of remote sensor to transmit RF signal.
When RF connection is established, the respective temperature of the selected channel will
appear on the main unit.
WEATHER FORECAST & BAROMETRIC PRESSURE
The unit predicts weather condition of the next 12 – 24 hours based on the change of atmospheric
pressure. The coverage area is around 30 – 50 km. The weather forecast is based on atmospheric
pressure change and is about 70-75% correct. As weather conditions cannot be 100% correctly
forecasted, we cannot be responsible for any loss caused by an incorrect forecast.
SUNNY
PARTLY CLOUDY
CLOUDY
RAINY
STORMY
To obtain an accurate weather forecast & barometric pressure reading, you need to input your current
altitude. After the reset of the unit, it will enter the altitude setting mode. Press “
▲
” or “
▼
” to set the
unit first, and then press “BARO” and enter your current altitude. Press “BARO” to confirm and exit
the setting. You can also hold “BARO” button to enter altitude setting mode during normal use.
Press BARO button to select pressure unit between hPa, inHg & mb.
IN/OUT TEMPERATURE
Press “C/F“ button to select temperature unit C/ F.
