11
The time will automatically synchronize Internet time server at 12:00AM and 12:00PM per day.
Also you can press the
[REFRESH ]
key to get the internet time manually within 1 minute.
ADVANCE SETTING IN WEB INTERFACE
Press
"ADVANCED"
key at the top of web interface to enter the advance setting page, this
page allow you to set and view the calibration data of the console, also you can update the
firmware in here (Only available in PC platform).
-800 ~ 800hpa / -23.62 ~ 23.62inHg / -601.5 ~ 601.5mmHg
Setting Range:
SETUP
ADVANCED
Language:
English
Temperature
o
C
Outdoor
Indoor
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
CH 7
Humidity %
Relative Pressure Offset:
Absolute Pressure Offset:
hpa
Range: -20 ~ 20
(Default: 0)
Current offset: 10
Current offset: -9
Current offset: -5
Current offset: 2
Current offset: -2
Current offset: 3
Current offset: -2
Current offset: 1.2
Current offset: -5
Current offset: -0.2
Current offset: -3
Current offset: -20.1
Current offset: -10
Current offset: 11 .5
Current offset: -3
Current offset: -3
(Default: 0)
Current offset: 10
(Default: 0)
Current offset: 0.2
Current offset: -5
Current offset: 1
Pressure
Range: -20.0 ~ 20.0
o
C
-36 .0 ~ 36 .0
o
F (Default: 0.0)
**UV gain:
Range: 0.01 ~ 10(Default: 1.00)
Current gain: 1.1
** Depends on outdoor sensor type
Wind speed gain:
**Wind direction:
Rain gain:
Range: 0.5 ~ 1.5(Default: 1.00)
Range: -10 ~ 10(Default: 0
o
)
Range: 0.5 ~ 1.5(Default: 1.00)
Current gain: 0.85
Current offset: 2
o
Current gain: 0.75
Function firmware version: 1.00
WiFi firmware version: 1.00
Temperature
calibration section
Pressure
calibration section
Rain
calibration section
Wind
calibration section
Press “ADVANCED” icon
to advancd page
Select setting unit
Humidity
calibration section
Select setting unit
Advancd page
CALIBRATION
1 . User may enter or change the offset and gain values for different measurement parameters
while current offset and gain values are shown next to their corresponding boxes.
2 . Once completed, press
Apply
in the SETUP page
The current offset value will show the previous value that you entered, if you want to change,
just input the new value in the blank, the new value will valid once you press
Apply
icon in
SETUP page.
NOTE:
Calibration of most parameter is not required, with the exception of Relative Pressure, which
must be calibrated to sea-level to account for altitude effects.
VIEW YOUR WEATHER DATA IN WUNDERGROUND
To view your weather station live data in a web browser (PC or mobile version), please visit
http://www.wunderground.com
, and then enter your “Station ID” in the searching box. Your
weather data will show up on the next page. You can also login your account to view and
download the recorded data of your weather station.
