Venturo ET10KX, Installation & Owner'S Manual

Page: 27 / 64

15660
C200
1-15-02E 8-2-06F
INSTALLATION - BATTERY CABLE WINCH & CRANE
SUPERCEDES
TITLE
DATE
SECTION
CINCINNATI, OHIO MANUFACTURING, INC.
Important: The crane must make connection with the negative of the battery. To insure this, install a #2 gauge grounding strap from the engine to the truck frame (required if negative from battery is connected to the engine.) Also, install a #2 gauge grounding strap from the crane base to the truck frame, included with electric cranes. Failure to accomplish the above mentioned steps may result in intermittent operation of electric crane.
Master disconnect switch necessary for safety (locate for easy access)
Engine to truck frame
Attach cable to battery terminal or starter solenoid ("hot" side)
Fuse or circuit breaker (P/N 19417) recommended. Locate as close to starter or battery as is practical.
ET6KR shown
Battery *
Power unit cable *
* Note: See
Dwg 711105
for recommended battery and cable specifications