background image

E - 9

INSTALLATION

INSTALLING / REMOVING ThE BASE STAND

WARNING: The LCD Display is very fragile, and must be protected at all times when removing the 

base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD 

display, comes into contact with it. Do NOT exert pressure on the front of the unit at any time because 

the screen could crack.

1.   Disconnect all cables or cords connected to the unit.

2.   Lay  the  unit  down  on  a  flat  surface  with  the  back  side 

facing up. Please make sure to place a soft cushioned 

material (such as a pillow or thick piece of foam) beneath 

the screen.

3.   To  install  the  base  stand,  place  the  base  stand  on  the 

mounting slot, push the stand till it locks.

4.   To remove the base stand, keep pressing the locking area 

of the base stand and pull downwards to release the base 

stand.

MOUNTING ThE TV UNIT

1)  Mark the correct mounting position on the wall.

2)  Insert a fixing screw(s) at the marked position on the wall.

3)  Align  the  slot  hole(s)  of  the  speaker  over  the  screw  and  pull  the TV  downward  until  it  is  firmly 

hooked.

NOTE

Remove the base stand before mounting the unit on the wall.

Press and pull downwards

PLV76156S7_IB_UL_090727.indd   9

7/28/2009   09:41:10

Summary of Contents for PLV76156

















Reviews: