ON
OFF
FCC Statements
This device complies with the Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesirable operation.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an AC power outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
ACCESSORIES
AC Power Adapter .................................................................................... x 1
Stand ........................................................................................................ x 1
Please check and identify the supplied accessories.
•
To order accessories visit web site (http://www.1800customersupport.com)
Need More Help?
DO NOT RETURN THIS PRODUCT TO THE STORE
Please visit online help at http://www.1800customersupport.com
Digital Photo Frame
Operating Instructions
SAFETY PRECAUTIONS
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK).
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
On Placement
• Do not use the unit in places that are extremely hot, cold, dusty or humid.
• Do not restrict the airflow of the unit by placing it in a place with poor airflow, by
covering it with a cloth, or by placing it on carpeting.
• Keep the stand of the unit clear from cables. Cables could pull the unit to the
floor.
• The unit should not be exposed to excessive heat such as sunshine, fire or the like.
On Safety
• When connecting or disconnecting the AC power adapter, grip the plug and not
the cord itself. Pulling the cord may damage it and create a hazard.
• When you are not going to use the unit for a long period, disconnect the AC
power adapter.
Temperature and Humidity Limitations
• Operating temperature: 41°F ~ 95°F (5°C ~ 35°C)
• Humidity: 20% ~ 80%
Rating Plate Location
• The rating plate is located on the back of the unit.
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR
NEAR THIS UNIT.
WARNING:
Should any trouble occur, disconnect the AC power adapter
and refer servicing to a qualified technician.
Turn off the unit before inserting or removing the memory card.
Do NOT insert or remove the memory card when the unit is playing files.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding - type plug.
A polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. When the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as the power-supply
cord or plug is damaged, liquid has spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
IMPORTANT SAFETY INSTRUCTIONS
Portable
Cart Warning
QUICK START GUIDE
CONTROL REFERENCE GUIDE
INSTALLATION
Using the Stand
The unit can be placed either horizontally or vertically to fit the photos on display by
its stand.
1. Slide the stand into the slots on the
back of the unit as illustrated.
2. Place the unit horizontally or vertically.
The exclamation point within the equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in this owner's manual.
The lightning flash with an arrowhead symbol, within the equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of sufficient
magnitude to cause an electric shock.
POWER SUPPLY
The unit is compatible with the following Memory Card:
• Secure Digital Card (SD) • Memory Stick
Pro (MS Pro) • Extreme Digital (xD)
INSERTING MEMORY CARD
Insert any compatible memory card with the front label facing the rear of the product.
Do not force the memory card into the memory card slot.
Caution:
• The AC power adapter included with this unit is for its use only. Do not use it with
other equipment.
• Turn off the unit before unplugging the AC power adapter from the unit to avoid
the unit being damaged.
• When the unit is not going to be used for a long time, disconnect the AC power
adapter from the AC power outlet.
Important:
• Be sure to use it near the wall outlet. If a malfunction occurs, disconnect the plug
from the wall outlet at once.
• When the AC power adapter is plugged in, the apparatus is not completely
disconnected from the main power source, even when the unit is turned off.
Warning:
The AC power adapter is used as the disconnect device. To completely disconnect
the apparatus from the main power supply, the AC power adapter should be
disconnected from the AC power outlet completely.
Turn off the unit before inserting or removing the memory card.
Do NOT insert or remove the memory card when the unit is playing files.
E - 3
E - 2
E - 1
E - 4
ON
OFF
To AC 120V outlet
To DC IN 9V jack
Insert a memory card.
Back of Unit
AC Power
Adapter
Slide the OFF/ON
switch to ON
position.
For easy removal, memory card will stick out a bit.
ON
OFF
ENTER
ROTATE
MENU
2
1
SD
XD
MS
3
DC
IN
9V
4
ON
OFF
5
6
SD/MMC
MS Pro
xD
Caution:
• Mounting the unit requires special skills that should only be performed by qualified
personnel.
• Make sure that the wall mount is being fixed securely enough so that it meets
safety standards.
Mounting on the Wall
The unit can be mounted either horizontally or vertically on the wall by the mounting
holes on the back of the unit.
ON
OFF
ON
OFF
116mm
64mm
To
AC 120V
outlet
To DC IN 9V jack
AC Power Adapter
RIGHT SIDE OF UNIT
Back of Unit
Slide the OFF/ON
switch to ON
position.
1. LCD Screen
2. Function Buttons
Button
Press to start, pause and resume
photo slide show playback.
Press and hold to display the
thumbnail menu. Use the ,
,
buttons to select a photo, press the
button to start playback.
ENTER Button
Confirm settings in the Setup Menu.
, , Buttons
Move between selections on the
Setup Menu screen.
:
Skip to the previous photo.
:
Skip to the next photo.
ROTATE Button
Rotate the photo by 90
o
.
Press and hold the
ROTATE
button
to change the display aspect ratio (Fit
Screen or Return to normal).
MENU Button
Enter and exit the Setup Menu.
3. SD / xD / MS Card Slot
4. DC IN 9V Jack
5. OFF / ON Switch
6. Removeable Stand
DPF561SE
Note
:
If you can not easily insert a memory card (not included), try turning the card over
and inserting it again.
For easy removal, memory card
will stick out a bit.
