MEMORY OPERATION
12
ADDING A NEW ENTRY TO MEMORY
– Key in the telephone numbers that to be stored.
– Press MEM key to enter to save mode.
– Enter the corresponding Name of the key in number.
– Press the YES button to confirm and phone number would be saves into Phonebook.
Particular points to note are:
– Alpha characters are entered by pressing the number keys, which cycle round the
available characters. For example, to enter a ‘C’, press the key number 2 key (the
ABC key) three times. The user interface waits at each letter position until a key is
pressed, then stays there until no key is pressed for 3 seconds, at which point it moves
on to the next letter position. The user can correct entries using the
5
key.
– Pauses in the dialing sequence may be programmed as part of the number by pressing
the R/P Key during the number sequence.
– Holding down the NO key at any point allows the user to abort the procedure.
– There will be no checking for repeated entries. The user will be allowed to enter the
same name and/or number into two or more memories.
DELETING A MEMORY ENTRY
Memory deletion is considerably simpler than adding new memory entries.
– Press the MEM key to enter to Phonebook directly.
– Press scroll keys
6
/
5
to choose the phone numbers and press YES to select.
– The selected phone number would be displayed on the LCD.
– Press
3
/
4
until “<DELETE>” is displayed, then press YES to delete the phone number.
EDITING A MEMORY ENTRY
Both the alpha name field and the phone number field of a memory entry can be edited.
This allows the user to change entries whose names have been misspelled or when their
contacts move house.
– Press the MEM key to enter to Phonebook directly.
– Press scroll keys
6
/
5
to choose the phone numbers and press YES to select.
– The selected phone number would be displayed on the LCD.
– Press
3
/
4
until “<EDIT>” is displayed, then press YES to start the Editing.
– Press the YES key to save after the phone number editing.
9025_ib_us2.p65
11/21/02, 12:11 PM
13
