LAUTUS/2020/V2
tel. +48 (22) 751 95 50 www.venture.pl fax. +48 (22) 751 22 59
17/20
Fig. 7. Screws to be removed
5.3 Recommended maintenance time for device components
Cleaning the G4 pre-filter– every 2000 hours or according to the device signaling that the filter is dirty (description of signals in point 4.2)
after checking the condition of the filter and the cause of the failure.
Replacing the G4 pre-filter – every 10 000 hours or earlier in case of operation under very polluted air.
Replacing H13 filter – every 20 000 hours - replacement should be combined with replacement of the filter H14 and UV-C lamp, to maintain
full tightness and quality of filtration in the chamber between the filters.
Replacing H14 filter – every 20 000 hours - replacement should be combined with replacement of the filter H13 and UV-C lamp, to maintain
full tightness and quality of filtration in the chamber between the filters or according to the device signaling about unsealing of the filter
(description of signals in point 4.2) after checking the condition of the filter and the cause of the failure.
UV-C lamp - every 20 000 hours - replacement should be combined with replacement of the filter H13 and filter H14, to maintain full
tightness and quality of filtration in the chamber between the filters or according to the device signaling about lamp failure (description of
signals in point 4.2) after checking the condition of the lamp and the cause of the failure.
The service of the G4 filter can be fully realized by the user of the device.
For the replacement of components such as: H13 filter, H14 filter, UV-C lamp,
please call the VENTURE INDUSTRIES Sp. Z o.o. service.
DO NOT USE ALTERNATIVE SOURCES
We recommend that you carry out routine inspections by the VENTURE INDUSTRIES Sp. z o.o.
6. REPAIRS, WARRANTY
Use only original spare parts and original accessories. Device repairs need to be made by manufacturer or after manufacturer permission
Consumables such as filters and the UV-C lamp are not covered by the warranty due to natural wear.
7. DISMANTLING AND RECYCLING
Disconnect unit from its power supply, and dismount according to the guidelines from section 1 of this instruction.
Therefore, please deposit all left-over material and packaging in their corresponding recycling containers and hand in the
replaced machines to the nearest handler of this type of waste product.
