Ventura DLB 410, Handbook Manual, Page: 11 / 19

10
•
Always select the rotor stop position before unthreading the drive shaft from a power drive on a tractor or a
completely independent power drive.
• Make a daily check on nuts, bolts, flexible and other fixture system. Checking for potential defect, alignment, or breakage that may
prejudice the safety of the machine. If you do find any such problem you should immediately take measures to make repairs or
replacements.
•
Any maintenance, repair or checking operation must be carried out with the machine completely still and
isolated from the power drive of the tractor. The ignition key must be taken out. Always position the machine on
points or blocks when such procedures are carried out in order to prevent any potential lowering or raising of
the tractor.
Safety advice stickers
“Warning!
Ensure that all security messages are legible. Clean them using soap and a cloth. Do not use solvents, diesel oil or
petrol. Replace damaged stickers by asking for them from the VENTURA If a stickers happens to be on a part that is
to be replaced, make sure
that another one is applied onto the replacement. ”
Stop the motor and
remo- ve the
ignition key before car-
rying out any
maintenance
operations or repairs.
Do not approach any
parts of your body to
the rota- ting parts
when the machine is in
operation or the motor
is running.
Keep at the safe
distance from the
vehicle or tools
Read carefully the
ma- nual of use and
main- tenance
before starting the
machine. Observe
safety rules and
securi- ty instructions
during functioning.
Do not open or
remo- ve the safety
guards when the
machine is in
operation or the
motor is running.
Do not remain in the
vi- cinity of swaying
parts of the machine
or the tractor.
Always wear safety
ear protection.
Maximum rotation
spe- ed of P.T.O. shaft:
540 or 1000 rpm.
Do not open or
remove the safety
guards when the
machine is in ope-
ration or the motor is
running