Vents VUTR 200 V2 EC A17, User Manual, Page: 7 / 28

www.ventilation-system.com
7
MOUNTING AND SET-UP
THE UNIT MUST BE MOUNTED BY A QUALIFIED EXPERT ONLY, PROPERLY TRAINED AND
HAVING THE REQUIRED TOOLS AND MATERIALS.
READ THE USER’S MANUAL PRIOR TO MOUNTING THE UNIT.
While mounting the unit provide enough access for maintenance or repair work.
The minimum recommended clearances between the unit and the adjoining walls are
given in the fi gure below.
When selecting a mounting location of the unit provide free opening of the service panel.
To attain the best performance of the unit and to minimise turbulence-induced air pressure
losses connect the straight air duct section to the spigots on both sides of the unit while
mounting.
Minimum straight air duct length:
• equal to 1 air duct diameter on intake side
• equal to 3 air duct diameters on outlet side
If the air ducts are too short or not connected, protect the unit parts from ingress of foreign
objects.
To prevent uncontrollable access to the fans the spigots may be covered with a protecting
grille or other protecting device with mesh width not more than 12.5 mm.
While installing the unit ensure convenient access for subsequent maintenance and repair.
The unit must be mounted on a plane wall.
Mounting of the unit to an uneven surface can lead to the unit casing distortion and
operation disturbance.
The unit is designed for mounting on a horizontal plane as well as for wall mounting with a
fi xing bracket that is fastened with four screws and dowels (not included in the scope of delivery).
min 100 mm
min 1 m
UNIT WALL MOUNTING
1. Attach the wall mounting bracket to the wall using dowels with screws
(not included in the scope of delivery). Attach the wall mounting bracket
to the wall considering the wall material and the unit weight.
2. Install the unit on the mounting bracket. Suspend the fan carefully.
Make sure the unit is fastened securely prior to operation.