3
VUT 300 (301) EV(K) mini EC
INTRODUCTION
USE
DELIVERY SET
Unit
-
1
item;
User’s manual
- 1 item;
Remote controller
- 1 item;
Shipping box
- 1 item;
Fastener kit
- 1 item.
The present user manual consisting of technical details, operating instructions and technical
specification covers the installation of the VUT 300 (301) EV (K) mini EC air handling unit with heat
recovery, VENTS series (hereinafter the unit).
The unit is designed to ensure continuous mechanical air exchange in houses, offices, hotels,
cafés, conference halls, and other utility and public spaces as well as to recover the heat energy
contained in the air extracted from the premises to warm up the filtered stream of supply air.
The unit is not intended for organizing ventilation in swimming pools, saunas, greenhouses,
summer gardens, and other spaces with high humidity.
Due to the ability to save heating energy by means of energy recovery, the unit is an important
element of energy-efficient premises.
The unit is a component part and is not designed for stand-alone operation.
It is rated for continuous operation.
Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals,
sticky substances, fibrous materials, coarse dust, soot and oil particles or environments favourable for
the formation of hazardous substances (toxic substances, dust, pathogenic germs).
Relative humidity of transported air must not exceed 80 % at an ambient temperature of +20 °C.
The unit is not designed to be used by children, physically or mentally disabled
persons, persons with sensory disorder or with no appropriate experience or expertise.
The unit must be handled only by properly qualified personnel after the
appropriate safety briefing.
Install the unit to be out of reach of children.
Warning!
The unit is not allowed for operation without properly installed fat filters or with
the clogged fat filters because ingress of oil and sticky substances may damage the
unit.
