www.ventilation-system.com
10
HV1 duct humidity sensor is a special accessory that is not included into the delivery set. To install the sensor connect the humidity sensor
socket connector XS7 to the socket connector XS7 inside the unit. Then fix the sensor with the clamp and the holder in the extract air duct
upstream of the heat exchanger.
1.
2.
3.
FUNCTIONAL DIAGRAM
Power
supply
Outside
Inside
Outside
Inside
P1
SM1
TE1
TE6
HV2
HV1
D1
F1
RK1
F2
TS1
TS2
Q1
M1
TE5
Digital input (DI)
Digital output (DO)
Analogue input (AI)
Analogue output (AI)
RS485
12 V AC
230 V AC
24 V AC
TE2
M2
D2
SM2
SM3
Designation
Name
D1*
Supply air damper
D2*
Extract air damper
F1
Supply filter
F2
Extract filter
M1
Supply fan
M2
Exhaust fan
P1
Control panel
Q1
Electric air heater
RK1
Plate heat exchanger
SM1*
Supply damper actuator
SM2*
Extract damper actuator
SM3
Bypass damper electric actuator
TE1
Outer air temperature sensor
TE2
Temperature sensor at heat exchanger outlet
TE5
Duct temperature sensor
TE6
Room air temperature sensor (included in the control panel delivery set)
TS1
Overheat protection thermostat actuated at +60°С with automatic reset
TS2
Overheat protection thermostat actuated at +90°С with manual reset
HV1*
Duct humidity sensor
HV2
Indoor humidity sensor
* Not included into the delivery set, available on separate order
