manualshive.com logo in svg

Vents VUE 100 P3B EC, User Manual

Share
Download
Vents VUE 100 P3B EC User Manual Download Page 9

9

www.ventilation-system.com

EXTRACT AIR

SUPPLY AIR

INTAKE AIR

EXHAUST AIR

INTAKE AIR

SUPPLY AIR

EXHAUST AIR

EXTRACT AIR

Left-handed modification

Right-handed modification

Defrosting mode

: to prevent the heat exchanger freezing in the cold season the unit has an automatic Defrosting mode according to 

the freeze protection temperature sensor readings in the exhaust air duct downstream of the heat exchanger.
The unit switches to the defrosting mode at the extract air tempe3 ° C. 
As the temperature rises the unit returns to the previous mode.
Only the extract fan operates in the defrosting mode, the supply fan is switched off.

Summer Cooling mode

: in the units with a bypass damper, the part of the intake air that is supplied to the premises bypasses the heat 

exchanger.

EXTRACT AIR

SUPPLY AIR

INTAKE AIR

EXHAUST AIR

INTAKE AIR

SUPPLY AIR

EXHAUST AIR

EXTRACT AIR

Left-handed modification

Right-handed modification

Summary of Contents for VUE 100 P3B EC

















Reviews:

No comments

Brands by name

Popular brands

Load more brands