3
This user’s manual consisting of the technical details, operating instructions and technical specification
covers the installation and mounting of the VDK fan for solid fuel boiler (hereinafter referred to as «the fan»
or «the unit» as mentioned in the «Safety requirements» and «Manufacturer’s warranty» sections as well as
in warnings and information blocks).
SAFETY REQUIREMENTS
Read the user’s manual carefully prior to installing and operating the unit.
Fulfil the user’s manual requirements as well as the provisions of all the applicable local and
national construction, electrical and technical norms and standards.
The warnings contained in the user’s manual must be considered most seriously since they
contain vital personal safety information.
Failure to follow the rules and safety precautions noted in this user’s manual may result in an
injury or unit damage.
After a careful reading of the manual, keep it for the entire service life of the unit.
While transferring the unit control the user’s manual must be turned over to the receiving
operator.
Symbol legend:
WARNING!
DO NOT!
UNIT MOUNTING AND OPERATION SAFETY PRECAUTIONS
•
Disconnect the unit from power
mains prior to any installation
operations.
•
The unit must be grounded!
•
Do not lay the power cable of the
unit in close proximity to heating
equipment.
•
While installing the unit follow
the safety regulations specific to
the use of electric tools.
•
Do not change the power cable
length at your own discretion.
•
Do not bend the power cable.
•
Avoid damaging the power cable.
•
Do not put any foreign objects on
the power cable.
•
Do not operate the unit outside
the temperature range stated in
the user’s manual.
•
Do not operate the unit
in aggressive or explosive
environments.
V119EN-01.indd 3
02.09.2015 7:55:09