www.ventilation-system.com
2
TwinFresh Comfo RB (1)-50 (85)
Read the user’s manual carefully prior to installing and operating the unit.
Fulfil the user’s manual requirements as well as the provisions of all the applicable local and national construction, electrical and
technical norms and standards.
The warnings contained in the user’s manual must be considered most seriously since they contain vital personal safety information.
Failure to follow the rules and safety precautions noted in this user’s manual may result in an injury or unit damage.
After a careful reading of the manual, keep it for the entire service life of the unit.
While transferring the unit control the User’s manual must be turned over to the receiving operator.
Symbol legend:
WARNING!
DO NOT!
The user’s manual consisting of the technical details, operating instructions and technical specification applies to the installation
and mounting of the single-room energy regeneration reversible ventilator TwinFresh Comfo RB(1)-50 (85), (hereinafter «the unit» as
mentioned in the «Safety Requirements» and «Manufacturer’s Warranty» sections as well as in warnings and information blocks).
CONTENTS
SAFETY REQUIREMENTS
UNIT MOUNTING AND OPERATION SAFETY PRECAUTIONS
•
Disconnect the unit from power mains
prior to any installation operations.
•
Unpack the unit with care.
•
Do not lay the power cable of the unit in
close proximity to heating equipment.
•
While installing the unit follow the
safety regulations specific to the use of
electric tools.
Safety requirements ..........................................................................................2
Purpose ..................................................................................................................4
Delivery set ............................................................................................................4
Designation key ....................................................................................................4
Main technical parameters ...............................................................................5
Design and operating logic................................................................................6
Mounting and set-up ..........................................................................................8
Unit connection ................................................................................................. 10
Control ................................................................................................................. 13
Maintenance ...................................................................................................... 15
Troubleshooting ................................................................................................ 16
Storage and transportation regulations .................................................... 17
Manufacturer’s warranty ................................................................................. 17
Acceptance certificate ..................................................................................... 18
Seller information ............................................................................................. 18
Installation certificate ...................................................................................... 18
Warranty card .................................................................................................... 18
