Vents NK 100-0,6-1, User Manual

Page: 4 / 24

www.ventilation-system.com 4
Duct heater
PURPOSE
Duct heaters are designed for heating of intake fresh air transported through the ventilating system.
The unit is a component part and is not designed for independent operation.
THE UNIT MAY NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED PHYSICAL,
MENTAL OR SENSORY CAPACITIES, OR LACKING THE APPROPRIATE TRAINING.
THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY QUALIFIED PERSONNEL
AFTER THE APPROPRIATE BRIEFING.
THE CHOICE OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORIZED ACCESS BY
UNATTENDED CHILDREN.
The heater is designed for extended periods of continuous operation without disconnection from the power mains.
Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals, sticky substances, fibrous materials, coarse dust, soot
and oil particles or environments favourable for the formation of hazardous substances (toxic substances, dust, pathogenic germs).
DELIVERY SET
Duct heater 1 item
User’s manual 1 item
DESIGNATION KEY
ТТ Сайлент М Д ХХХ - Х Х
Фазность двигателя:
Е - однофазный
Д - трехфазный
Материал корпуса
М - металл
Исполнение корпуса:
_ - без шумоизоляции
Сайлент - шумоизолированное
Модель вентилятора
Количество полюсов двигателя
Диаметр присоединяемого воздуховода, мм
Модель двигателя:
_ - базовый двигатель
Д - энергоэффективный двигатель
Number of supply voltage phases:
Heater power [kW]:
Spigot /branch pipe diameter (or dimensions) [mm]:
Heater name:
NK - duct heater
NK X - X - X
Designation example:
NK 315-9,0-3 – three-phase heater with branch pipe diameter 315 mm, power 9 kW.
NK 600x350-21,0-3 – three-phase heater for a rectangular duct 600x350 mm, power 21 kW.
The basic heater overall dimensions must correspond to the ones provided in the tables «Overall and connecting dimensions».
The basic heater parameters and thermal dynamic characteristics are shown in the tables «Main technical parameters».