Vents MPA 1200 W, User Manual

Page: 21 / 36

21
www.ventilation-system.com
5. Week Timer Adjustment.
Adjustment sequence for the week timer:
1. Time setting.
• Keep the button on the control panel display pressed for 3 seconds to enter the configuration
mode. Then select the “Minutes” parameter using the buttons on the control panel display
and set the minutes using the buttons .
• Select the “Hour” parameter using the buttons and set the hour parameter using the buttons
on the control panel display.
2. Weekday setting.
• In the configuration mode, select the weekday adjustment with the button and set the
parameters as follows using the buttons :
Mon-Fri: 1-5;
Sat: 6;
Sun: 7.
AUTO
SET
1 2 3 4 5 6 7
3. Time zone adjustment.
Press the button to select the time zone parameter.
The parameters are set with the button .
The time zones are adjusted as follows:
Adjustment1 Icon
Mon-Fri Sat Sunday
Time Temperature Time Temperature Time Temperature
First time zone
activation
1
6:00
20 °С
9:00
25 °С
9:00
25 °С
First time zone
deactivation
2
10:00 12:00 12:00
Second time
zone activation
3 17:00
25 °С
18:00
25 °С
18:00
20 °С
Second
time zone
deactivation
4 20:00 22:00 22:00
During the time span between the indicated time zones the unit is in standby mode, the fans are off.
AUTOMATIC RESTART AFTER RESUMPTION OF POWER SUPPLY
All the current data are saved in the control panel memory in case of power failure. After
resumption of power supply the unit reverts to the previous operation mode. The data
saving function is also available for the Week Scheduled Operation Model.
TEMPERATURE SENSOR CALIBRATION
Turn the control panel off and keep the button on the display pressed for 3 seconds
to enter the debugging mode. In the off condition all the buttons are located in the same
positions but are not highlighted. To change the settings in the respective mode press the
buttons as follows:
1 - Temperature calibration (from -9 °C up to +9 °C).
— Temperature compensation upwards.
— Temperature compensation downwards.