3
SAFETY REQUIREMENTS
•
Read the user’s manual carefully prior installing and operating the energy recovery air handling unit (hereinafter referred to as «the
unit»).
•
Fulfil the operation manual requirements as well as the provisions of all the applicable local and national construction, electrical and
technical norms and standards.
•
The warnings contained in the user’s manual must be considered most seriously since they contain vital personal safety information.
•
Failure to follow the rules and safety precautions noted in this user’s manual may result in an injury or unit damage.
•
After a careful reading of the manual, keep it for the entire service life of the unit.
•
While transferring the unit control the user’s manual must be turned over to the receiving operator.
Symbol legend:
UNIT MOUNTING SAFETY PRECAUTIONS
WARNING!
DO NOT!
Disconnect the unit from power mains prior to
any installation or repair operations.
The unit must be grounded!
The unit must not be operated outside the
temperature range stated in the user's manual
and in aggressive or explosive environments.
Do not use damaged equipment or cables when
connecting the unit to power mains.
While installing the unit follow the safety
regulations specific to the use of electric tools.
Unpack the unit with care.
Do not change the power cable length at your
own discretion.
Do not bend the power cable.
Avoid damaging the power cable.
Do not position any heating devices or other
equipment in close proximity to the unit power
cable.
