19
www.ventilation-system.com
Timer activation. Timer settings are made in the Basic Settings - Timers menu.
Week-scheduled operation mode activation. The settings of this mode are made in the Basic
settings - Schedule menu.
Recirculation
– activation of the recirculation mode. If there is no recirculation mode, the button is inactive.
Heater
– selecting the temperature setpoint for the reheater or turning it off.
Basic settings
Timers
Main timer: timer mode settings.
When the timer is activated in the Home page menu, the unit temporarily goes to the following settings:
1
Selection of pre-set speed 1-5, Standby..
00:30
Timer setting
Control temperature selection. Ava15 °С.. + 30 °С, off. If OFF is selected, temperature
control will not be performed while the timer is running.
Boost turn-off delay:
determines the turn-off delay time for the Boost mode after the signal at the
digital input (Boost switch) disappears on the control board.
Boost turn-on delay:
determines the turn-on delay time for the Boost mode after the signal is applied
to the digital input (Boost switch).
Schedule
The weekly schedule can be set by means of 4 time intervals available for each day of the week.
Adjustment can be made for every day, weekdays, weekends or for the whole week.
When the Schedule mode is activated from the
Main page
, the unit will operate as scheduled
according to the following parameters:
1
Selection of pre-set speed 1-5, Standby.
Time setting for a specific segment.
Control temperature selection. Ava15 ° С.. + 30 ° С, off. If OFF is selected, temperature
control will not be performed while the timer is running.
