3
This user’s manual consisting of the technical details, operating instructions and technical
specification covers the installation and mounting of the
Lumis 100 axial fan
with integrated
light source (hereinafter referred to as «the fan» or «the unit» as mentioned in the «Safety
requirements» and «Manufacturer’s warranty» sections as well as in warnings and information
blocks).
SAFETY REQUIREMENTS
Read the user’s manual carefully prior to installing and operating the unit.
Fulfil the user’s manual requirements as well as the provisions of all the applicable
local and national construction, electrical and technical norms and standards.
The warnings contained in the user’s manual must be considered most seriously
since they contain vital personal safety information.
Failure to follow the rules and safety precautions noted in this user’s manual may
result in an injury or unit damage.
After a careful reading of the manual, keep it for the entire service life of the unit.
While transferring the unit control the User’s manual must be turned over to the
receiving operator.
Symbol legend:
WARNING!
DO NOT!
UNIT MOUNTING AND OPERATION SAFETY PRECAUTIONS
• Disconnect the unit from power
mains prior to any installation
operations.
• Unpack the unit with care.
• Do not lay the power cable of the
unit in close proximity to heating
equipment.
• While installing the unit follow
the safety regulations specific to
the use of electric tools.
• Do not lay the power cable of the
unit in close proximity to heating
equipment.
• Do not operate the unit outside
the temperature range stated
in the user's manual as well
as in aggressive or explosive
environments.
V01-LUMIS-01_EN.indd 3
17.08.2015 11:09:15
mepokerkft.hu
