Vents BKMI 160 S, User'S Operation Manual, Page: 5 / 16

5
VKMI 100 Q
2 2 0 -240 /50
60
0,37
210 2620 3 0 -25 +55
VKMI 100
VKMI 1 25 Q
VKMI 1 25
VKMI 1 50 Q
VKMI 1 60 Q
VKMI 200
VKMI 200 S
VKMI 25 0 Q
VKMI 250
VKMI 315
VKMI 315 S
73
60
75
75
73
154
193
158
194
171
296
0,32
0,37
0,33
0,33
0,33
0,67
0,84
0,69
0,85
0,77
1,34
270
255
355
470
470
950
1100
1190
1310
1400
1880
2830
2535
2800
2515
2500
2375
2780
2315
2790
2600
2720
30
41
41
40
40
42
45
46
46
46
48
-25 +55
-25 +55
-25 +55
-25 +55
-25 +55
-25 +50
-25 +45
-25 +50
-25 +50
-25 +50
-25 +45
Fan type
Voltage
[V / Hz] Power
[W]
Current
[A]
Max. air capacity
3
[m /h]
RPM
-1
[min ]
Noise level,
3 m [dBA]
Max. transported
0
air temperature [ C]
VKMI 1 50 98
0,43 555
2705 41 -25 +55
VKMI 1 50 S 116
0,52
645 2625 44 -25 +55
VKMI 1 60 98 0,43 555 2660
41
-25 +55
VKMI 1 60 S 115
0,52
645 2650 44 -25 +55
Table 2
MOUNTING
The fan is designed for horizontal installation on the feet, fig. 2. The fan may be equipped (modification
VKMI XXX K) with a fixing bracket with vibration dampers (or delivered separately) to facilitate the fan
mounting in horizontal or vertical position to the floor, to the wall or to the ceiling, fig. 3.
If the fan is mounted outdoors it should be protected against the elements and moisture ingress, e.g. by
means of a top hood above the fan in case of vertical mounting and by 1 diameter air duct in case of
horizontal mounting. The outlet spigot must always be connected to air duct. The fan mounting sequence is
shown in fig. 4-10 and 11-16. Wiring diagram for a fan model without power cable and a plug is shown
in fig. 11.
MAINTENANCE
The product surfaces must be regularly (once in 6 months) cleaned from dirt and dust (fig. 19-21).
Disconnect the fan from power mains prior to any maintenance operations.
For cleaning use a soft cloth or brush and mild detergent water solution.
Avoid water dripping on the electric components (fig. 22).
Wipe the surfaces dry after cleaning.
mepokerkft.hu