Introduction - 5
INTRODUCTION
Product Description
Accessories
Item Description
Part Num
ber
MS600 Mulching Kit
(includes 79.0111 mulch blades)
70.8165
Low Lift Blade (requires 3)
79.0108
Gator Blade (requires 3)
79.0110
Mulch Blade (requires 3)
79.0111
Hydraulic Deck Flip Up Kit
70.8163
Flat Free Tire/Wheel Assembly (requires 2 per mower)
53.0148
The MS600 mower is designed for the sole purpose of finish mowing and is built to be the best cutting and
longest lasting finish mower available. The high strength steel mower deck has an obstruction free grass
chamber to minimize buildup and provide easy cleaning. A rugged all steel reinforced carrier frame incorpo-
rates a full length rear roller for even cutting and grass striping.
The MS600 features a 60 inch (152 cm) cutting width. Ventrac’s Linear Adjustment System provides eigh-
teen cutting height positions from 1” (25 cm) to 5” (127 cm). A single hand adjustment lever allows for a
quick change in cutting height selection. A slide release allows the handle to be returned to deck level,
preventing it from catching on low branches and shrubs.
The deck can be tilted up to a near vertical position for cleaning, maintenance, or storage. An optional
hydraulic deck flip up kit uses the power unit hydraulic system to flip the deck up to the vertical position.
Why Do I Need an Operator’s Manual?
This manual has been created to help you gain the important knowledge of what is needed to safely
operate, maintain, and service your machine. It is divided into sections for convenient reference of the
appropriate section.
You must read and understand the operator’s manual for each piece of Ventrac equipment you own. Read-
ing the operator’s manual will help you become familiar with each specific piece of equipment. Under
-
standing the operator’s manual will help you, as well as others, avoid personal injury and/or damage to the
equipment. Keep this manual with the machine at all times. The manual should remain with the machine
even if it is sold. If this manual becomes damaged or unreadable, it should be replaced immediately. Con-
tact your local Ventrac dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both
the power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine
while getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual
may result in personal injury and/or damage to the equipment.
V
enture Products Inc. is pleased to provide you with your new
Ventrac MS600 mower! We hope that Ventrac equipment will
provide you with a ONE Tractor Solution.
Listed below are just some of the items that can provide you
versatility
as you use your MS600. Please visit our website, or
contact your authorized Ventrac dealer for a complete list of
items available for your new MS600 mower.
