background image

2

B

A

To the Owner

Contact Information and Product Identification

 

If you need to contact an authorized Ventrac dealer for information on servicing your product, 

always provide the product model and serial numbers.

Please fill in the following information for future reference. See the picture(s) below to find the 

location of the identification numbers. Record them in the spaces provided.

 

Date of Purchase:  __________________________________________________________________

Dealer: ___________________________________________________________________________

Dealer Address: ____________________________________________________________________

                          ____________________________________________________________________

Dealer Phone Number: ______________________________________________________________

Dealer Fax Number: ________________________________________________________________

Model #  (A): ___________________________
Serial # (B): ____________________________

Affix Part/Serial Number label here.

Venture Products Inc. reserves the right to make changes 

in design or specifications without obligation to make like 

changes on previously manufactured products.

 500 Venture Drive

Orrville Oh 44667

www.ventrac.com

View all manuals

Visit ventrac.com/manuals  

for the latest version of this 

operator’s manual.
A downloadable parts manual 

is also available.

Summary of Contents for KH500 Versa-Loader










































Reviews: