OPERATIONAL CONTROLS
Operation - 15
Accuway Spread Pattern Control (C)
Different materials and spread conditions can cause
the center of the spread pattern to shift to the left or
right of the spreader. The Accuway spread pattern
control is used to bring the center of the spread pat-
tern back in line with the center of the spreader.
Travel
Spread
Pattern
New
Spread
Pattern
Set
Accuway
to:
Heavy to
Left
Heavy to
Right
Moving the Accuway plate shifts the material on
the spinner. Adjustment is very sensitive and
should be done in small increments until the
spread pattern is centered.
Rate Dial (D)
The rate dial is used to control the gate opening and
regulate the amount of material that is dispensed.
The rate dial has nine numbers with ten stops
between each number for accurate control and
resetting of spread rate. The higher the number, the
heavier the application of material. The dial is set by
turning to the desired setting. When released, the
dial will lock into the set position.
9.9 Setting
Full Open Setting
The rate dial has a slot in it at the 9.9 position
that will allow the metal guide for the rate gate to
slide through. This allows the gate to open fully for
spreading mulch and other high volume products.
Summary of Contents for ES220
Page 23: ...Specifications 23 Blank Page ...