Introduction - 5
INTRODUCTION
Accessories
Item Description
Part Number
Hydraulic Deck Flip Up Kit
70.8224
Product Description
The MY series fast cut flail mowers are equipped with Y knives for dense or brush-type material. The MY flail
mower is available in two sizes. The MY560 has a 142 cm (56 inch) cutting width and the MY720 has a 183 cm (72
inch) cutting width.
The flail mower features a cutting height range from 25 mm (1 inch) to 101.5 mm (4 inches) in 6.4 mm (1/4 inch)
increments, along with settings for 114.3 mm (4-1/2 inches) and 127 mm (5 inches). The cutting height is easily
adjustable using the two height adjust handles. The flail mower also features side to side oscillation, front to
back rotation, and a full length rear roller for even cutting and grass striping.
The deck can be tilted up to a near vertical position for cleaning and maintenance. An optional hydraulic deck
flip up kit uses the power unit hydraulic system to flip the deck up to the vertical position.
Why Do I Need an Operator’s Manual?
This manual has been created to help you gain the important knowledge of what is needed to safely operate, main-
tain, and service your machine. It is divided into sections for convenient reference of the appropriate section.
You must read and understand the operator’s manual for each piece of Ventrac equipment you own. Reading
the operator’s manual will help you become familiar with each specific piece of equipment. Understanding the
operator’s manual will help you, as well as others, avoid personal injury and/or damage to the equipment. Keep
this manual with the machine at all times. The manual should remain with the machine even if it is sold. If this
manual becomes damaged or unreadable, it should be replaced immediately. Contact your local Ventrac dealer
for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both the
power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine while
getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual may result
in personal injury and/or damage to the equipment.
Venture Products Inc. is pleased to provide you with your new
Ventrac flail mower! We hope that Ventrac equipment will provide
you with a ONE Tractor Solution.
Please visit our website, or contact your authorized Ventrac dealer
for a complete list of items available for your new flail mower.
