17
Step 10
Insert the unit control connection cable into the pipe. The cabling between the
control and the unit is provided. The actual connection of the control is described
hereinafter (see how to do this in chapter 3 of these instructions).
2.5.11. Installation of the Outer Cover: Steps 11–13
When installing the cover, please, ensure there is sufficient stability of your
footprint. Secure yourself against falling hazard. If necessary, please, check the
current statutory safety regulations
.
Step 11
Attach the mounting panel of the outer cover to the outer wall using the screws and nuts
supplied.
Due to the outer wall flatness tolerances, installation of
the outer cover can be difficult. Therefore, we
recommend the mounting screws not to be over
tightened.
Step 12
Insert the outer cover to the mounting panel.
