4
Installation Steps
1.
Connect the HDMI signal source to the HDMI extender sender
2.
Connect the HDMI extender receiver to a display device (such as a high-definition
TV, splicing screen, etc.)
3.
Connect the network interface between the sender and the receiver using a CAT6
network cable
4.
Connect any end of the sending end or receiving end to power supply. When the
indicator light is normally on, the system runs normally
5.
EDID button use, such as the PWR of the transmitter after the connection, STA
indicates long light, PWR at the receiving end, STA indicates long light, when the
display has no image or color change, the transmitter is powered, the HDMI port
of the display and the HDMI of the transmitter Connect the port, press and hold
the EDID button until the STA light flashes. After the flashing stops, restart the
power supply and repeat steps 1-5.
Application
For warranty service or support please contact Vention team:
Website:
All rights reserved. © 2020 Alza.cz a.s.
High-definition
players
HDMI Cable
TX
Cat6
UP to 60m
TV
HDMI Cable
RX
