56
4.3
Accessing the installer mode/configuration mode
To correctly set the VMI® unit, you must use the remote control's installer
mode. To do this, press the
button until you get to the following
screen:
The installer code is
1919
.
Press the
buttons to change the value of the selected number. To
confirm and move on to the next number, press
.
The value of the code is only checked on the last number after pressing the
button. The
following screen appears:
Choose your language by pressing the
buttons then press
to confirm.
Check that the date and time are correct.
Use the
button to return to the main screen.