Ventev TerraWave Rapid Deployment Kit with Battery Backup System Assembly Instructions Download Page 3

Page: 3 / 4

www.ventev.com/infra

1-800-851-4965

Wi-Fi Rapid Deployment Kit with Battery Backup System

For Aruba Access Points

5) Thread the 3 nylon straps through eye-bolts on the enclosure

tray. Loop the straps around the tripod legs (above the connec-
tion bar) and tighten them equally until the tray is suspended and
level.

ASSEMBLY INSTRUCTIONS

6) Slide the tripod foot assembly over the tripod leg and loci it into

place with the locking pin.

7) Place antenna bracket over desired holes on the t-bar and lock it

into place with the pin.

8) Place cinder blocks or weights on the tripod foot assembly in or-

der to weigh the tripod down if needed.

Tripod Leg

Connection Bar

Nylon Straps

Foot Assembly
QTY 3

Larger Locking Pin
QTY 1

Antenna and
Antenna Bracket

Smaller Locking Pin
QTY 3

Summary of Contents for TerraWave Rapid Deployment Kit with Battery Backup System

Page 2: ... tray on the floor where the cen ter of the tripod will be 2 Attach enclosure to tray using 1 4 screws screws only need to be hand tightened ASSEMBLY INSTRUCTIONS 3 Place tripod base directly over the enclosure Enclosure should be in the center of the 3 legs 4 Place tripod T Bar on tripod base and tighten knob 1 4 Screws Qty 4 T Bar Tripod Base Enclosure ...