background image

www.ventev.com/infra 

  [email protected] 

   1-800-851-4965 

Wi-Fi Rapid Deployment Kit with Battery Backup System 

For Aruba Access Points 

Ventev’s TerraWave Rapid Deployment Kit allows setup of a mobile wireless network in combination with an Aruba AP274 
or AP275 access point. The combination of an AP and the Rapid Deployment Kit  provides a ruggedized temporary Wi-Fi 
solution, supporting voice, video, and data access across a large area.  

The Rapid Deployment Kit includes a tripod (with an extension pole), mounting hardware, data cables, quick start guide, 
and a battery backup system that includes 10 hours of battery backup

.

 

 

Specifications 

Temperature Range 

-30 

°

C

 

(

22

 

°

F)

 

to

 

40

 

°

C

 

(+104

 

°

F)

  

Battery Backup Time 

10 Hours 

Recharge Time 

12 Hours  

Battery 

17.2 Amp Hour  

Base System Voltage 

Voltage 12 Vdc  

Power Supply 

12 Vdc, 60W  

Gigabit PoE Repeater Output 

56 Vdc at 50 Watts maximum 

Min Height 

64” 

Max Height 100” 

100” 

◊ 

Designed to deploy in both indoor and outdoor 

environments 

◊ 

Provides robust temporary Wi-Fi connectivity 

◊ 

Ideal for expos, festivals, concerts, sporting events, 

conferences, meetings, and disaster recovery 

System Highlights 

The TerraWave Rapid Deployment Kit is   

covered by a limited 1-year warranty.  For 

questions on coverage or to purchase product, 

contact a Regional Sales Executive at 210-375-

8482, 800-851-4965 or [email protected].  

* Aruba AP Not included 

Summary of Contents for TerraWave Rapid Deployment Kit with Battery Backup System

Page 1: ...em that includes 10 hours of battery backup Specifications Temperature Range 30 C 22 F to 40 C 104 F Battery Backup Time 10 Hours Recharge Time 12 Hours Battery 17 2 Amp Hour Base System Voltage Voltage 12 Vdc Power Supply 12 Vdc 60W Gigabit PoE Repeater Output 56 Vdc at 50 Watts maximum Min Height 64 Max Height 100 100 Designed to deploy in both indoor and outdoor environments Provides robust tem...

Page 2: ... tray on the floor where the cen ter of the tripod will be 2 Attach enclosure to tray using 1 4 screws screws only need to be hand tightened ASSEMBLY INSTRUCTIONS 3 Place tripod base directly over the enclosure Enclosure should be in the center of the 3 legs 4 Place tripod T Bar on tripod base and tighten knob 1 4 Screws Qty 4 T Bar Tripod Base Enclosure ...

Page 3: ...ntil the tray is suspended and level ASSEMBLY INSTRUCTIONS 6 Slide the tripod foot assembly over the tripod leg and loci it into place with the locking pin 7 Place antenna bracket over desired holes on the t bar and lock it into place with the pin 8 Place cinder blocks or weights on the tripod foot assembly in or der to weigh the tripod down if needed Tripod Leg Connection Bar Nylon Straps Foot As...

Page 4: ...le to the boom and mast as follows One strap on the boom hold the Access Point prior to extending the mast Two straps on the mast of the tripod once it is extended 5 Connect the data input of the power enclosure to your network cable not included 6 Optional Connect the power enclosure to AC power using an outdoor rated extension cord not included RECHARGE INSTRUCTIONS 1 Connect power enclosure to ...

Reviews: