Vente Unique NEVADO, Owner'S Manual

Page: 17 / 39

16
NOTICE
When the heater is first turned on, a slight odor may be present. This is normal and should
not occur again unless the heater is not used for a long period of time.
NOTICE
To improve operation, aim the remote control at the front of the fireplace. DO NOT press the
buttons too quickly . Give the unit time to respond to each command.
Temperature Limiting Control
This heater is equipped with a Temperature Limiting Control. Should the heater reach an unsafe temperature, the
heater will automatically turn OFF. To reset:
1.
Unplug the power cord from the outlet.
2.
Turn the ON/OFF switch on the TOUCH PANEL to OFF. Wait 5 minutes.
3.
Inspect the fireplace to make sure no vents are blocked, or clogged with dust or lint. If they are, use a
vacuum to clean the vent areas.
4.
With the POWER switch in the OFF position, plug the power cord back into the outlet.
5.
If the problem continues, have your outlet and wiring inspected by a professional.
HEATER
HEATER button : Turns heater on and off.
NOTE: The heater only works when the flame
effect is on. If the flame effect is off, the heater
will not turn on.
NOTE: To prevent overheating, the heater blows
cool air for 8-10seconds before the heater turns
on, and after it turns off.
1. Press once . LED Indicator lights up. Continue
press Fan blows cool air for 10 seconds. Then
Low heater turns on and blows warm air.
2. Press again . LED Indicator lights up.
High heater turns on and blows hot air.
3. Press again. Heaters turn off.
The fan blows cool air, then turns off.
TEMP
TEMPERATURE button: Turns heater on and
off.
NOTE: Press the button for 5 seconds, the
temperature setting will switch from
℃
to
℉
. Same way from
℉
to
℃
。
P 1. Press once: Touch panel indicator
becomes active.
2.
Press again: until desired setting is ‘
Reached. Digital display shows setting
circles as below:
TOP
LIGHT
TOP LIGHT button : Makes the
decorative LED top light effect get
changing.
1 . Press once . LED top light color
effect gets changing.
2 . Press again until desired setting
is reached.total 10 colors.