Ventamatic, Ltd. P.O. Box 728, Mineral Wells, TX 76068-0728
1-800-433-1626 Fax: 940.325.9311 www.BVC.com
3
RULES FOR SAFE OPERATION
•
Do not insert fingers or any objects through grille guard when fan is in operation.
•
Disconnect fan when moving from one location to another.
•
Disconnect fan when removing guards for cleaning.
•
Make sure fan is on a stable, flat surface when in operation.
•
Rain and moisture may create an electrical hazard.
•
In order to prevent extension pipe spring from projecting up, do not release 2 adjusting
screws (6) when extension pipe is all the way down.
OPERATION INSTRUCTIONS
TO ADJUST AIRFLOW UPWARD OR DOWNWARD: (Unplug unit first!)
Loosen position bolt (10), then loosen pivot bolt (9). Tilt motor to desired angle, and tighten
pivot bolt. Tighten position bolt.
SPEED CONTROL: Pull chain on motor assembly to set to desired setting: high, medium, or low.
OSCILLATION (limited models): Pull the oscillation knob up or down on motor to control oscilla-
tion function as desired.
CLEANING
WARNING: Unplug from electrical supply source before cleaning. After servicing, any safety
device (including grilles and blades) must be reinstalled or remounted as previously installed.
Use a soft, damp cloth, then wipe with a dry cloth. Do not use harmful cleaners. Do not bend
blades.
FAN COMPONENTS
1.
Base Frame
2.
5 Screws
3.
Base Collar
4.
Outer Pole with Spring
5.
2 Screws and Washers
6.
Adjustment Collar
7.
Height Adjustment Knob
8.
Inner Pole Extension
9.
Pivot Bolt, Spring Washer
and Nut
10.
Position Bolt, Spring
Washer and Nut
11.
Motor Assembly
12.
4 Nuts, Spring Washers
and Flat Washer
13.
Allen Wrench, zip tie, 8
grille screws (not shown)
14.
Rear Grille
15.
Blade Assembly
16.
Front Grille