Wiring Diagram for isolation switch with Remote Control
WARNING:- For your safety, Ensure the mains supply is switched off and
isolated before performing any electrical work.
Step 1 :
Connect the EARTH wire to the terminal port marked “ “on the terminal block mounting
bracket.
Step 2:
Connect the supply LIVE wire to the localised single pole switch and then wire to the terminal
port marked “L” on the terminal block mounting bracket.
Step 3:
Connect the supply Neutral wire to the terminal port marked “N” on the terminal block
mounting bracket.
Once all the above steps have been followed, you are now ready to restore the mains power supply.
Make sure there is nobody near or under the fan, then turn ON the fan.
Summary of Contents for Stanza STA1203WH
Page 7: ...Light kit assembly ...
