Ventair Sahara Installation Instructions Download Page 5

CARE AND MAINTENANCE

•  This fan heater must not be installed near curtains or other combustible materials.
•  The appliance must under no circumstances be covered with insulation material or similar material.
•  Joists, beams and rafters must not be cut or notched to install the appliance. 
•  This unit must cool before cleaning. To clean the fascia, wipe with a dampened cloth. This appliance is not intended for use by 

persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they 

have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Young children 

should be supervised to ensure that they do not play with the appliance.

DISPOSAL

Do not dispose of electrical products with household waste. Please check with your local council for advice on disposal or recycling. If 

electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food 

chain, damaging your health and well-being.

Installation Instructions

Fan Heater, Light and Exhaust

Sahara

Electricians, please ensure a copy of the Installation

Instructions are left with the end user for future reference

Page 5 of 5

Summary of Contents for Sahara






Reviews: