10
REPAIRING THE FAN RECEIVER AND REMOTE
NOTE: The remote and receiver has already been paired at the factory. When the ceiling fan is
installed for the first time, pairing of the remote and receiver is NOT required.
Should the remote and receiver lose control after installation or during use, the pairing of the remote and
the receiver must be repaired. Below are the operating symptoms and method to repair the pairing of the
DC ceiling fan remote and receiver.
Issues:
•
Loss of control - Fan is only running at high speed after installation
•
Loss of control - No reverse function after installation
•
Loss of control - Remote cannot communicate with the receiver
Solution:
•
Switch off the main power to ceiling fan.
•
Press and hold the “
” button on the remote for 5 seconds ‘
within 30 seconds’
of
re-instating the power (isolation switch ON). The fan
will have “bee-bee” sound to indicate the
paring process is activated.
•
Turn ON and change the speed of the ceiling fan by the remote to check the operation and
successful paring.
REVERSE FUNCTION
Your ceiling fan can operate either in fan mode or reverse fan mode.
Forward
Mode: The fan rorates in an anticlockwise direction. The airflow will be directed downwards, for
cooling in summer.
Reverse
Mode: The fan rorates in
a clockwise direction. The airflow will be directed upwards, for energy
conservation in winter.