background image

 

CLEANING, STORAGE AND DISPOSAL 

 

Regular and careful cleaning helps your infrared heater operate efficiently for many trouble-free years. To 
clean your heater, follow steps below: 

1.  Disconnect the power supply to the heater for your safety before cleaning your appliance. 
2.  Make sure the heater is cool before continuing. 
3.  To keep the heater clean, the outer shell maybe cleaned with a soft, damp cloth. You may use a mild 

detergent if necessary. After cleaning, dry the unit with a soft cloth. (CAUTION: DO NOT let liquids 
enter the heater). 

4.  DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to clean the 

heater. This may cause damage or deterioration to the surface of the heater. 

5.  DO NOT immerse the heater in water 
6.  Wait until the heater is completely dry before use. 

 

ATTENTION: 

1.  Always disconnect the heater from the electricity supply and allow it to cool before attempting to work on 

it. 

2.  If the heater has collected dust or dirt inside the unit or around the heating element, have the unit 

cleaned by a qualified service agent. Do not operate the heater in this condition. 

3.  The only maintenance required is cleaning of the external surfaces of the heater. 
4.  Do not touch the heating element with bare fingers, as residue from your hand could affect the life of the 

lamp. If it is accidentally touched, remove the finger marks with a soft cloth moistened with mentholated 
spirit or alcohol. 

5.  Do not attempt to repair or adjust any electrical or mechanical functions on this heater. 
6.  The heater contains no user serviceable parts. Should the product suffer damage or breakdown, it must 

be returned to the manufacturer or its service agent. 

7.  Damaged supply cords to be replaced by the manufacturer, service agent or similarly qualified person in 

order to avoid hazard. 

 

Storage:

 

Store

 

the

 

heater

 

in

 

a

 

cool,

 

dry

 

location

 

when

 

not

 

in

 

use

 

to

 

prevent

 

dust

 

and

 

dirt

 

build

 

up.

 

Use

 

packaging

 

carton

 

to

 

store.

 

If

 

you

 

do

 

not

 

plan

 

to

 

use

 

the

 

heater

 

for

 

extended

 

periods

 

of

 

time,

 

it

 

is

 

recommended

 

that

 

it

 

is

 

cleaned

 

and

 

stored

 

(preferably

 

in

 

its

 

original

 

packaging)

 

in

 

a

 

cool,

 

dry

 

place.

 

Do

 

not

 

dispose

 

of

 

electrical

 

products

 

with

 

household

 

waste.

 

Please

 

check

 

with

 

your

 

local

 

council

 

for

 

advice

 

on

 

disposal

 

or

 

recycling.

 

If

 

electrical

 

appliances

 

are

 

disposed

 

of

 

in

 

landfills

 

or

 

dumps,

 

hazardous

 

substances

 

can

 

leak

 

into

 

the

 

groundwater

 

and

 

get

 

into

 

the

 

food

 

chain,

 

damaging

 

your

 

health

 

and

 

well

being.

 

 

 

 

 

 

PO

 

BOX

 

1285,

 

CRAWLEY,

 

RH10

 

0LY,

 

UK

 

EU

 

Authorised

 

Representative:

 

Anda

 

Products

 

Bedrijvenweg

 

17

 

7442

 

CX

 

Nijverdal

 

Nederland

 

[email protected]

 

 

497518A

 

 

 

 

 

 

 

 

 

 

0621

 

Summary of Contents for SUNB3000BL









Reviews: