How does the heater control work?
The control allows you to choose when you want heat and at what temperature. When using
a timer mode (see below)
will display on the home screen to tell you when the heater is
maintaining the temperature displayed. The current time will be displayed when the heater is
outside of a timed heating period.
When
Manual
,
Schedule
or
Frost
modes are being used the heater will always maintain
the temperature shown on the home screen.
Set the Time
To set the date and time on the heater, press
Menu
, then press
Up
three times to highlight the
Date & time
Icon, press
Enter
. Use the
Down
and
Up
to increase/decrease the hour, press
Enter to confirm. Repeat this process to set the minutes, Day, Month and Year. Press Enter
to
confirm and return to home screen.
Set the Temperature
The temperature shown on the display is the target room temperature known as Setpoint.
This is the temperature that the heater will maintain during the heating periods. If the room
temperature is above this temperature then the heater will not operate. The heater leaves
the factory with this temperature set at 21
o
C which represents a typical comfortable room
temperature. If you require a different room temperature then press either Down
or
Up
until the
display shows the temperature you require
Your heater comes pre-programmed with four heating periods. These periods set the time
and temperature at which the heater operates in Comfort ON mode. These four periods are:
• P1: 07:00 – 09:00 21
o
C
• P2: 10:00 – 12:00 7
o
C
• P3: 13:00 – 15:00 7
o
C
• P4: 17:00 – 21:00 21
o
C
Quick Start Guide
8
