Vent-Axia Kinetic Advance White Installation Instructions Download Page 4

Page: 4 / 4

Step 14

Check all 3 pins are out.

Step 15

Hold duct flange firmly against the wall. Using the toggle pull to
ensure wall kit is tight in the hole.

Step 16

Using supplied screws and rawl plugs attach flange to wall.

Step 17

(Shutter models only)

478593 A

0618

PO BOX 1285, CRAWLEY, RH10 0LY

Summary of Contents for Kinetic Advance White

Page 1: ...L KIT RANGE Installation Instructions Models White Brown White with Shutter Brown with Shutter Please read these instructions carefully before commencing installation Please retain these instructions...

Page 2: ...the way through wall to outside Step 3 Measure hole and note length if deeper than 25cm go to step 5 If shorter than 25cm trim the outer pipe s ears go to steps 3 4 Step 4 Step 5 Step 6 Step 7 1 Push...

Page 3: ...ok down pipe and check that the two arrows are lined up and both facing upwards Step 11 1 Push wall kit through wall 2 Ensure locking pins are outside wall 3 Check arrow is at top Step 12 Insert folde...

Page 4: ...Hold duct flange firmly against the wall Using the toggle pull to ensure wall kit is tight in the hole Step 16 Using supplied screws and rawl plugs attach flange to wall Step 17 Shutter models only 47...