OPERATING
-5
Control panel functions
Control panel functions
1.Power:
Press once to start and press once more to stop the unit.
2.Mode:
Press this button to change the operation mode in order of:
COOL
→
DRY
→
FAN
→
COOL
3.
" "
" "
:
In "COOL" mode, press button " " once, the temperature. will decrease 1
°F)
Press" " once, the temperature will increase 1
℃
(°F). The temperature can be selected from 16
℃
(61°F) ~ 30
℃
(86°F)
4.Fan:
Press this button to change the operation fan in order of: LOW
→
MED
→
TURBO
→
AUTO.
5. Timer:
Press the timer button to enter into the timer setting mode.
Press “ “ “ “ to program the air conditioner to come on or off at a set time. The timer setting will
increase or decrease by 0.5 hours each time the button is pressed up to the first 10 hours indicated.
After 10 hours it will increase by 1 hour to a maximum of 24 hours.
Once the timer setting is finished, the unit will then display the temperature. (If no operation for 5
seconds). Press the timer button again if you wish to cancel the timer mode.
6. Sleep:
Press sleep button to enter into sleep mode. If the controller is operating in cooling or drying mode,
Once the sleep mode is activated (in cooling mode), the preset temperature will increase by 2°C within
2 hours and then the unit will operate at this temperature all the time. Once the sleep mode is
activated (in drying mode), the preset temperature will decrease by 2°C within 2 hours and then the
unit will operate at this temperature all the time. Sleep function is not selectable when the unit is in fan
or auto mode.
1
5
6
3
3
2