WI-FI SETUP
The Wi-Fi module must be installed and recognized by the thermostat before starting the Wi-Fi setup. If just the
dot of the (Wi-Fi symbol) is present on the display, then the thermostat recognizes that the Wi-Fi module is
installed. After a successful connection to a local access point is completed, the entire Wi-Fi symbol appears
on the display.
This Wi-Fi module requires the Venstar Configurator App for setup. Please go to
your mobile device’s App Store and download the Venstar Configurator App.
Then follow the steps below.
Configurator
app icon
WiFi symbol
1. Open the Venstar
Configurator App on your mobile device.
a. Select “Setup Wi-Fi” on the Configurator App.
2. Press the
Accessory Setup button on the thermostat
to enter Wi-Fi or Skyport setup.
3. Press the Cooler button on the thermostat to configure
Wi-Fi settings.
4. Press “Continue” on the Configurator App then
leave the
Venstar Configurator App on your mobile device and
go to the settings of your mobile device.
a. Select
Wi-Fi.
b. Select “
THERMOSTAT-xxxx” from the list.
c. Enter the password:
“123456789” on your mobile device
for the thermostat.
d.
When the mobile device is associated to the thermostat
return
to the Venstar Configurator App and select “Continue”.
5. Select the access point of your building or home displayed on
your mobile device. Your thermostat will communicate through
this access point.
6. Enter your password for this access point and select “
Done”
in the upper right corner to accept your password
7. Press “
Continue” in the lower right corner to complete the setup.
When completed, the scrolling display of the thermostat will confirm successful
Wi-Fi connection in addition the full Wi-Fi symbol will appear on the display.
ACCESSORY
STATUS ACCESSORY
SETUP
SKYPORT SETUP
Although there is more than one way to create a Skyport account, the steps below illustrate account creation from a browser.
To create a Skyport account a thermostat must be joined to the account.
1. Open your browser to: http://venstar.skyportcloud.com
2. Select “
Create Account Now”.
3. Follow onscreen directions to create an account and add a thermostat to the Skyport account.
If the thermostat is connected to the local Wi-Fi access point but not yet joined to a Skyport account, you may join the thermostat
to an account by doing the following:
1. Log in to your Skyport account.
2. Select the “
Location” you want to add a thermostat into.
3. Select the “
Thermostat tab”.
4. Select
“+ Add Thermostat”. A screen will ‘pop-up’ asking for a six digit code.
5. Press the Accessory Setup button on the thermostat.
6. Press the Warmer button on the thermostat.
7. A six digit code will appear on the thermostat’s display.
8. Enter the six digit code into your Skyport account.
