11
How to use your thermostat
Press the
OFF | RUN HOLD TO SET
button to exit
Time Period Programming at any time.
OFF
RUN
HOLD TO SET
OFF
|
RUN
HOLD TO SET
(cont.)
Programming a Daily Schedule
Once the Set Program prompt appears the Mode button will step you through
the settings. When selecting a Mode for Unoccupied/Occupied, options are
OFF, HEAT, COOL, HEAT and COOL. These may be limited by the selection in
setup step #2, AVAILABLE MODES.
Select the Mode for the Occupied period – Press the Warmer or Cooler buttons
to choose the mode for the occupied period.
Adjust the Weekday Occupied Cool Setpoint
Adjust the Weekday Occupied Heat Setpoint
Set the Unoccupied Mode – Press the Warmer or Cooler buttons to choose the
mode for the Unoccupied period. The thermostat is in Unoccupied when the
Time Period Schedule is running and there is not an active Occupied period.
Adjust the Unoccupied Cool Setpoint – Press the Warmer or Cooler buttons to
adjust the Cooling setpoint for times when the thermostat is in Unoccupied.
Adjust the Unoccupied Heat Setpoint – Press the Warmer or Cooler buttons to
adjust the Heating setpoint for times when the thermostat is in Unoccupied.
Adjust the Weekday Occupied Start Time
Adjust the Weekday Occupied Stop Time
Adjust the Weekend Occupied Start Time
Adjust the Weekend Occupied Stop Time
To save and exit – Press the Program button.
