1. Screw the shelf bearings horizontaly onto the wall (with the closed side up)
Please note the distance between the shelf bearings from middle of shelf bearing
to middle of shelf bearing! (see drawing)
2. Adjust the tilt silightly upwards by use of the adjusting screw next to the pin.
3. Push the shelf carefully onto the pin.
IMPORTANT: The provided fittings (screws and anchor bolts) are only for cement
and/or solid brickwork. If the consistency of the wall is different you must use
suitable fittings that can hold the load.
Assembly instruction for wall shelf
plastic dowels
shelf bearing
wood screw
wall shelf